Navigating the Location tab

When you create a New Request, location is automatically captured from the device’s GPS. This is shown on the location tab, by:

  1. The nearest address, at the top of the screen.
  2. The blue dot on the map.

The accuracy of the GPS is shown by the GPS accuracy box on the left of the screen.

If GPS accuracy is not good, or if you are standing in one place but is recording data from somewhere more than a couple of metres away:

  1. Tap on the target location on the map.
  2. A blue pushpin will appear. Tap again to change the location if required.

You can view either a Standard, Hybrid or Satellite basemap by selecting from the buttons at the bottom.


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Article is closed for comments.
Powered by Zendesk